Skip to main content
Gaggia Classic Pro / Evo Pro (RI9380) espresso setup
Gaggia

Gaggia Classic Pro / Evo Pro (RI9380)

The benchmark Italian single-boiler espresso machine featuring a commercial 58mm chrome-plated brass group and 3-way solenoid valve.

58 mm
Portafilter
15 bar
Pump
2.1 L
Water Tank
230...
(W × D × H)

Find Compatible Accessories

See portafilters, tampers, baskets and more that fit this machine.

Open Fit Finder →

About the Gaggia Classic Pro / Evo Pro (RI9380)

Italian single-boiler espresso machine equipped with a commercial-width 58mm group head using Gaggia's proprietary 2-ear diagonal locking tab orientation and a 3-way solenoid valve.

Mechanically verified with a 58mm group head (2 diagonal locking ears, 6.3mm tab thickness, 45° diagonal offset (Gaggia specific — NOT E61 compatible)), Single Boiler with dual external heating elements, and a recommended tamper base of 58.4mm – 58.5mm (with precision baskets) / 58.0mm (stock basket).

Key Specs
Portafilter Size 58 mm
Pump Pressure 15 bar
Water Tank 2.1 L
Dimensions (W × D × H) 230 × 240 × 380 mm
Weight 7.26 kg
Milk Steaming Commercial two-hole steam wand
Pros
  • Commercial 58mm chrome-plated brass group head
  • Traditional 3-way solenoid valve for dry puck knock-out
  • Heavy-duty stainless steel housing built in Italy
  • Extensive modding community (9-bar OPV, PID kits)
Cons
  • Single aluminum boiler requires temperature surfing
  • Stock 12-bar pump spring benefits from 9-bar mod
  • Takes 5–10 minutes to reach full thermal saturation

Compatibility at a Glance

View full compatibility in Fit Finder
Key Fitment & Clearance Notes
⚠ Conditional
Normcore Spring-Loaded Calibrated Tamper V4 (58.5mm Flat Stainless Base (58mm Precision Basket Fit))

Recommended when using VST, IMS, or aftermarket 58mm precision baskets. For the stock tapered OEM Gaggia basket, a 58.0mm base avoids wall binding.

⚠ Conditional
Normcore Ultra-Slim Sintered Contact Puck Screen (58.5mm Diameter • 1.7mm Thickness • 150µm Mesh)

Reduce dry coffee dose by 0.5g–1.0g below basket rating (or install a countersunk shower screen kit) so the 1.7mm puck screen does not press against the center screw.

✕ Incompatible
ECM / Standard E61 Spec Standard E61 / Commercial 58mm Bottomless Portafilter (Horizontal Ears) (58mm • 2-Ear 90° Horizontal Tab (5.8mm–6.0mm))

Do not purchase E61-cut portafilters for Gaggia Classic Pro; the handle will either fail to insert or point sideways at 10 o'clock.

Recommended Accessories

Verified compatible and conditional accessories tested for the Gaggia Classic Pro / Evo Pro (RI9380).

View all (8) rulings
Filter Baskets ✓ Compatible
VST Inc. 18g Ridgeless Precision Filter Basket
VST Inc.

18g Ridgeless Precision Filter Basket

58mm Commercial • 18g Ridgeless • H24.2mm

Cleaning & Care ✓ Compatible
Urnex Cafiza Espresso Machine Cleaning Powder
Urnex

Cafiza Espresso Machine Cleaning Powder

566g (20oz) Jar • NSF Certified Group & Basket Detergent

Tampers ⚠ Conditional
Normcore Spring-Loaded Calibrated Tamper V4
Normcore

Spring-Loaded Calibrated Tamper V4

58.5mm Flat Stainless Base (58mm Precision Basket Fit)

Portafilters ✓ Compatible
Gaggia Milano OEM 58mm Gaggia Bottomless Portafilter (45° Diagonal Ears)
Gaggia Milano OEM

58mm Gaggia Bottomless Portafilter (45° Diagonal Ears)

58mm • 2-Ear 45° Diagonal Tab (6.3mm)

Dosing Funnels ✓ Compatible
Normcore Magnetic Dosing Funnel V2 (Outer Rim Sit)
Normcore

Magnetic Dosing Funnel V2 (Outer Rim Sit)

58mm Outer Rim Magnetic Ring (10 Neodymium Magnets)

WDT Tools ✓ Compatible
Subminimal Flick Retractable WDT Espresso Distribution Tool
Subminimal

Flick Retractable WDT Espresso Distribution Tool

6x 0.35mm Rounded Stainless Needles (Universal Basket Fit)

Puck Screens ⚠ Conditional
Normcore Ultra-Slim Sintered Contact Puck Screen
Normcore

Ultra-Slim Sintered Contact Puck Screen

58.5mm Diameter • 1.7mm Thickness • 150µm Mesh

As an Amazon Associate I earn from qualifying purchases.

Full Caliper-Verified Dimensions & Specs

Last verified:
Nominal Group Head Diameter
58mm
Recommended Tamper Base
58.4mm – 58.5mm (with precision baskets) / 58.0mm (stock basket)
Stock Basket Inner Diameter
58.0mm (stock) / 58.55mm (VST & IMS precision)
Locking Ears
2 diagonal locking ears (6.3mm)
Ear Angular Orientation
45° diagonal offset (Gaggia specific — NOT E61 compatible)
Max Spouted Basket Depth
24.5mm (stock spouted) / 28mm (bottomless)
Max Bottomless Basket Depth
30mm
3-Way Solenoid Valve
Yes — 3-way solenoid valve (supports blind basket backflushing)
Heating System
Single Boiler with dual external heating elements
Dispersion Screen Clearance
Protruding center pan-head/hex screw; reduce dose by 0.5g–1.0g when using a 1.7mm puck screen

Verification Evidence & OEM Technical Sources

✓ GAG-58-DIAG-2EAR OEM Parts Diagram & Physical Fitment Verification
Gaggia Classic Pro / Evo Pro Group Head Locking Ear Geometry

Gaggia 58mm group uses 2 locking ears oriented at a 45-degree diagonal offset relative to the handle axis (6.3mm ear thickness). Standard E61 58mm portafilters have ears at 90 degrees (horizontal) and cannot lock into the Gaggia group ring.

✓ VST-18G-RL-58 Manufacturer Dimensional Spec
VST 18g Ridgeless Precision Filter Basket Dimensional Sheet

Internal diameter 58.55mm (+/- 0.05mm), external height 24.2mm. Compatible with 58.5mm precision tamper bases and fits standard 58mm spouted and bottomless portafilter bodies on Gaggia Classic Pro and Rancilio Silvia.

✓ PFL-HEADSPACE-17MM Lab Bench Fitment Protocol
1.7mm Sintered Mesh Puck Screen Headspace & Screw Clearance Test

1.7mm sintered steel puck screens require at least 2.0mm of vertical headspace above the tamped coffee bed. On groups with protruding center hex screws (Gaggia Classic, Rancilio Silvia), dose must be reduced by 0.5g–1.0g to prevent screen deformation.

Primary Reference
Gaggia Classic Pro RI9380 Exploded Parts & Group Diagram
Group Head Ring & 2-Ear Diagonal Portafilter Assembly
Gaggia Milano Spare Parts Technical Catalog RI9380/46
Primary Reference
VST 58mm Ridgeless Basket Compatibility Notes
58mm Commercial Group Inner Collar Fitment
VST Inc. Spec Sheet VST-18G-RL-58

Frequently Asked Questions

What size tamper fits the Gaggia Classic Pro / Evo Pro (RI9380)?

The Gaggia Classic Pro / Evo Pro uses a nominal 58mm group head with an internal basket tamper zone of 58.0mm (stock) / 58.55mm (VST & IMS precision). We recommend a 58.4mm – 58.5mm (with precision baskets) / 58.0mm (stock basket) calibrated tamper base for an edge-to-edge seal that prevents perimeter channeling.

What portafilter locking ear geometry does the Classic Pro / Evo Pro use?

The Classic Pro / Evo Pro requires 2 diagonal locking ears with a 6.3mm tab thickness and 45° diagonal offset (Gaggia specific — NOT E61 compatible) orientation. Always match ear count, angle, and tab thickness—nominal 58mm diameter alone does not guarantee fit.

Can I backflush the Gaggia Classic Pro / Evo Pro with a blind basket and Cafiza?

Yes. The Gaggia Classic Pro / Evo Pro (RI9380) includes a 3-way solenoid valve (Yes — 3-way solenoid valve (supports blind basket backflushing)) and safely supports detergent backflushing using a blind basket or rubber cleaning disc.

What is the maximum filter basket height for the Classic Pro / Evo Pro?

For the stock spouted portafilter, the maximum basket depth is 24.5mm (stock spouted) / 28mm (bottomless). With a compatible bottomless portafilter, it accommodates deep competition baskets up to 30mm.

Does a 1.7mm puck screen fit the Gaggia Classic Pro / Evo Pro?

Protruding center pan-head/hex screw; reduce dose by 0.5g–1.0g when using a 1.7mm puck screen. Always verify at least 2mm of headspace above the tamped coffee bed before locking in the portafilter.

Related Guides for Gaggia Classic Pro / Evo Pro

View all guides →